Before the installation works...

In this Dalston house we laid approx. 98 sqm sqm of oak engineered wood flooring. During our initial survey, we did a thorough inspection of the floors and discussed with the client all possible options.

Our client has decided to go for floor fitting, beading installation, stairs fitting, and install Timberlay Engineered Oak Wood Flooring, Lacquered, 150x5x18 Mm with solid white scotia beading around perimeter.

How we completed the installation works...

After our floor installers have checked all service, property & products details on site, including amount of products supply, they started with lifting existing carpet & laminate flooring and its preparation for disposal to our waste facility.

During this flooring project we laid 98 sqm of engineered wood flooring, specifically - Timberlay Engineered Oak Wood Flooring, Lacquered, 150x5x18 Mm with floating installation, over timber subfloor (chipboard) onto Duralay Excel Silver 3.7 mm underlay with DPM barrier .

In this project we also fitted engineered wood flooring (matching plank) throughout 26 stair steps - step, nosing and riser. Our stairs fitting service is inclusive of supplying matching the floor stair nosing (tongue-and-groove or click). For real wood products we also stain the nosing (when necessary) to match the finish of the planks.

Due to the change of level, after the new flooring was installed - our experienced, local Dalston floor fitters made sure all affected doors & door frames are trimmed to height and adjusted to new flooring.

Overall the project was completed as originally planned and to the satisfaction of the client.