Before the fitting works...

In this Bow flat we fitted approx. 15 sqm sqm of oak engineered wood flooring. During our initial survey, we did a thorough inspection of the floors and discussed with the client all possible options.

Our client has decided to go for floor fitting, beading installation, floor sanding, staining, and install Galleria Professional Oak 190x20 Tawny Brown Lacquered with solid oak scotia beading around perimeter.

How we completed the floor works...

After our floor installers have checked all service, property & products details on site, including amount of products supply, they started with lifting existing and its preparation for disposal to our waste facility.

In this project we installed 15 sqm of engineered wood flooring, specifically - Galleria Professional Oak 190x20 Tawny Brown Lacquered with floating installation, over concrete subfloors onto Duralay Excel Silver 3.7 mm underlay with DPM barrier .

Our works included sanding of approx. 28 sqm engineered wood flooring and finishing in 2 coats matt Lacquer. The sealing went down with 1 coat of primer and 2 coats of Lacquer.

Our team prepared few samples on the unfinished sanded timber surface for the client to approve prior to application of the finish. The client chose to go for a beautiful stain colour to compliment the room interior.

Due to the change of level, after the new flooring was installed - our experienced, local Bow floor fitters made sure all affected doors & door frames are trimmed to height and adjusted to new flooring.

Overall the project was completed as scheduled and to the delight of the client.